Return to previous page

Ring Size Guide

Following Are Two Easy Methods For Finding Out Size Of Your Ring

This is a chart that will be extremely helpful for you to determine the ring size that you need. You can either make use of a tape or a small piece of string to measure the area that will be occupied by the ring. When it becomes a complete circle, make a mark on such string. This will be helpful for you to compare with the chart that is mentioned below. For extra width, you can add another size to accommodate.

Requirement:

  1. A strip of Paper or Tape .
  2. Pencil or Pen to mark on Strip.
  3. Ruler for Measuring Length in Milimeters.

Caution:

  1. Do not Tighten or loosen the Strip too much on finger. Adjust it with desired tightness before measuring.
  2. Take into account the Size of Knuckles (Finger Joints), If you take a size that is too small then Knuckles then the Ring may not get into the Finger. Using a wide Strip minimizes this error

 

Method 1

Step 01

  • Cut a thin strip of paper or Thread
  • Wrap the paper/Thread around your finger.
  • Mark the spot where the paper/Thread meet

Step 02

  • Measure the length of the thread with your ruler.
  • Use the following chart to determine your ring size.
RING SIZE (INDIAN) CIRCUMFERENCE
Inches MM
1 1.61 41
2 1.64 41.7
3 1.68 42.9
4 1.73 44.1
5 1.76 44.8
6 1.81 46.1
7 1.86 47.4
8 1.88 48
9 1.91 48.7
10 1.96 50
11 2.01 51.2
12 2.04 51.9
13 2.09 53.1
14 2.14 54.4
15 2.16 55.1
RING SIZE (INDIAN) CIRCUMFERENCE
Inches MM
16 2.21 56.3
17 2.24 57
18 2.29 58.3
19 2.31 58.9
20 2.37 60.2
21 2.39 60.8
22 2.44 62.1
23 2.46 62.7
24 2.51 64
25 2.54 64.6
26 2.59 65.9
27 2.64 67.2
28 2.66 67.8
29 2.72 69.1
30 2.74 69.7

Method 02

Requirement:

  1. A Ring that fits your finger
  2. Ruler (with markings in Millimeter)

If you already have a Ring that fits your finger perfectly, you can use this Method. Keep the Ring to the Ruler So that part of the ring is on both sides of the Controller symbols. Measure the Width by Inserting the Ring on the Controller (shown in the picture). Alternatively, you can place the Ring on a piece of paper and mark the inner circle using a pencil or pen. Now measure the Width by marking the find, using a Ruler.

Caution:

  1. The Measurement of Diameter should be Accurate. Remember, Diameter is the longest distance between two points on the Circle
  2. Use a Band-Type Ring for Accurate Measurement.
  3. The Ring Should be un-distorted (Perfectly round in Shape)

Step 01

  • Take a Ring and place it on a scale
RING SIZE (INDIAN) DIAMETER
Inches MM
1 0.51 13.1
2 0.52 13.3
3 0.54 13.7
4 0.55 13.9
5 0.56 14.3
6 0.57 14.7
7 0.59 15.1
8 0.6 15.3
9 0.61 15.5
10 0.62 15.9
11 0.64 16.3
12 0.65 16.5
13 0.66 16.9
14 0.68 17.3
15 0.69 17.5
RING SIZE (INDIAN) DIAMETER
Inches MM
16 0.7 17.9
17 0.71 18.1
18 0.72 18.5
19 0.73 18.7
20 0.75 19.1
21 0.76 19.3
22 0.77 19.7
23 0.78 19.9
24 0.8 20.4
25 0.81 20.6
26 0.82 21
27 0.84 21.4
28 0.85 21.6
29 0.86 22
30 0.87 22.2

International Ring Size Chart

INSIDE DIAMETER MILLIMETERS (MM) US AND CANADA UK, EUROPE AND AUSTRALIA SWITZERLAND ASIA(HK, CHINA, SINGAPORE, TAIWAN, JAPAN)
14.1 3 F 4 4
14.3 3.25 F.5 5.25 5
14.5 3.50 G
14.7 3.75 G.5 6.50 6
14.9 4 H 7
15.1 4.25 H.5 7.75
15.3 4.50 I 8
15.5 4.75 I.5 9
15.7 5 J 9
15.9 5.25 J.5 10
16.1 5.50 K 10
16.3 5.75 K.5 11.75
16.5 6 L 12.75 11
16.7 6.25 L.5 12
16.9 6.50 M 14 13
17.1 6.75 M.5
17.3 7 N 15.25 14
17.5 7.25 N.5
17.7 7.50 O 16.50 15
17.9 7.75 O.5
18.1 8 P 17.75 16
18.3 8.25 P.5
18.5 8.50 Q 17
18.8 8.75 Q.5 19
19.0 9 R 18
19.2 9.25 R.5 20.25
19.4 9.50 S 19
19.6 9.75 S.5 21.50
19.8 10 T 20
20.0 10.25 T.5 21
20.2 10.50 U 22.75 22
20.4 10.75 U.5
20.6 11 V 23
20.8 11.25 V.5 25
21.0 11.50 W 24
21.2 11.75 W.5
21.4 12 X 27.50 25
21.6 12.25 X.5
21.8 12.50 Y 28.75 26
22.0 12.75 Z
21.2 13 Z.5 27
21.4 13.25
21.6 13.50 Z1

Copyright © 2022 CaratGems Store Created by SH – Spaeman Hawk Services LLP